- Restores Dull Tubs, Tiles And Sinks
- Smooth High Gloss White Finish
- Strong Adhesion With Chip Resistant Film
- Water Resistant For Wet Bathroom Areas
- Easy Aerosol Application
|
PRODUCT NAME
|
TUB & TILE SPRAY PAINT
|
|||
|
CAPACITY
|
500ML & 400ML
|
|||
|
PRODUCT TYPE
|
AEROSOL
|
|||
|
PRODUCT CATEGORY
|
SPRAY PAINT
|
|||
|
BRAND
|
DSC SEVEN
|
|||
|
APPLICATIONS
|
Bathtubs
Tiles (bathroom wall tiles) Sinks |
|||
|
FEATURES
|
High Gloss Smooth Finish
Strong Adhesion
Water Resistant
Chip Resistant
|
|||
|
PRODUCT PACKING
|
12PCS/BOX
|
|||
|
CAN MATERIAL
|
TINPLATE
|
|||
|
PRIVATE LABEL
|
SUPPORT
|
|||
|
DESIGN SUPPORT
|
AVAILABLE, FREE OF CHARGE
|
|||
|
PRODUCT SAMPLE
|
AVAILABLE UPON REQUEST
|
|||
|
FACTORY SUPPLY
|
YES
|
|||
|
PORT OF LOADING
|
QINGDAO,CHINA
|
|||
|
DIRECTIONS
|
1. Clean the surface thoroughly and remove soap scum, grease and loose material. Lightly scuff glossy ceramic or acrylic surfaces. Rinse and let the surface dry completely before spraying.
2. Tape off surrounding walls, fittings, drains and hardware. Work in a well-ventilated area and cover the floor and nearby surfaces against overspray. 3. Shake the can well before use. 4. Spray a small test patch in an inconspicuous spot and check the color, flow and adhesion before doing the visible area. 5. Hold the can about 20–30 cm from the surface and spray in slow, overlapping passes. Apply thin coats rather than one heavy coat to avoid runs and sags. 6. Apply 2–3 coats, allowing the recommended flash-off / recoat interval between coats. 7. Allow the finish to dry fully before normal use. Keep the surface free of water and heavy handling during the cure period. 8. Turn the can upside down and spray briefly to clear the nozzle after use. Store the can upright in a cool, dry place. |
|||
|
DELIVERY LEAD-TIME
|
15-30 DAYS
|
|||
|
PAYMENT TERM
|
30% deposit in advance, balance against copy bill of lading
|
|||
|
MOQ
|
6000PCS
|
|||
Reviews
There are no reviews yet.